With the rapid development of the global new energy industry, Malaysia—an important market in Southeast Asia—has imposed increasingly strict access requirements for battery products. Malaysia battery certification has become a mandatory entry condition for products entering this market. This article comprehensively analyzes the system, process, standards, and practical key points of Malaysia battery certification, providing detailed compliance guidance for relevant enterprises.

Overview of Malaysia Battery Certification System

Malaysia implements a mandatory certification system for battery products, mainly managed and enforced by SIRIM QAS International. SIRIM (Standard and Industrial Research Institute of Malaysia) is a government-owned entity entrusted by the Malaysian government as the national organization for standards and quality, serving as a driver of industrial technical excellence in Malaysia.

Under Malaysia’s Electrical Equipment Approval Regulations, electrical products including batteries require mandatory type approval and safety certification. Batteries without SIRIM certification cannot be legally sold in the Malaysian market and may even be detained by customs.

Scope of Certified Battery Products

According to the latest regulations, the following types of battery energy storage products must obtain SIRIM certification before entering the Malaysian market:

• Lithium-ion batteries: Including energy storage systems/UPS backup batteries, light electric vehicle batteries (e.g., e-scooters, e-bikes), electric vehicle lithium batteries, general portable batteries, etc.
• Lead-acid batteries: Including backup energy storage batteries (UPS, battery rooms, etc.), automotive and motorcycle starter batteries.
• Nickel-based batteries: General portable batteries for digital cameras, cordless phones, power tools, etc.
• Other emerging battery technologies: Including various new types of battery products.

Two Main Certification Modes & Selection Strategies

SIRIM offers two certification modes for battery products, allowing enterprises to choose flexibly based on product characteristics and market strategies:

1. Type 5 Product Certification Mode (Suitable for Long-Term Bulk Exports)

• Validity period: 1 year (requires annual renewal).
• Key process: Document evaluation → Payment → Factory audit → Sampling test → License issuance.
• Subsequent requirements: Annual surveillance audit and inspection of Malaysian warehouses are required.
• Features: Ideal for enterprises aiming to establish a long-term and stable presence in the Malaysian market.

2. Type 1B Batch Certification Mode (Suitable for Single-Batch Shipments)

• Validity: One-time, applicable only to the specific batch.
• Key process: Document evaluation → Payment → Inspection and sampling → Sample test → Batch certificate issuance.
• Features: No factory audit required; suitable for enterprises with single-batch shipments or those testing the market.

Core Standard Requirements

Detailed Applicable Standards for Various Batteries

(1) Lithium-ion Batteries

• Energy storage systems/UPS: IEC 62040-1
• Light electric vehicles: UN R136 and/or IEC 62619, IEC 62660-3, UN 38.3
• Electric vehicles: UN R100, IEC 62660-3, UN 38.3
• Portable devices: MS IEC 62133 or IEC 62133-2, UN 38.3

(2) Lead-Acid Batteries

• Stationary energy storage batteries: IEC 60896 series standards
• Starter batteries: MS 45 or IEC 60095 series standards

(3) Nickel-Based Batteries

• Portable devices: MS IEC 62133 or IEC 62133-1

Transportation Safety Requirements

Regardless of whether the battery product ultimately requires SIRIM certification, a UN38.3 test report is mandatory for the air transportation of lithium batteries. Enterprises must prepare this in advance.

Detailed SIRIM Certification Application Process

Malaysia battery SIRIM certification typically includes the following key steps:

1. Confirm Certification Scope & Standards

   • Clarify key parameters such as battery type, rated voltage, and capacity.
   • Confirm the applicable combination of MS standards through an agent or SIRIM.

2. Appoint a Local Agent

   • Overseas enterprises must submit applications through a Malaysian-registered agent.
   • The agent must have SIRIM-registered qualifications and be responsible for application submission, sample testing coordination, communication, and subsequent certificate maintenance.

3. Submit Documents & Samples

   • Prepare technical documents: Including electrical schematics, bill of materials, battery parameters, safety protection design, etc.
   • Provide component certificates (e.g., for batteries, inverters).
   • Prepare factory quality management system documents (e.g., ISO 9001).
   • Provide samples (must be consistent with submitted documents).

4. Laboratory Testing

   • Safety testing: Insulation, dielectric strength, electric shock protection, fire resistance.
   • Battery testing: Overcharge, short circuit, temperature cycling, vibration and shock.
   • EMC testing: Emission and immunity (if applicable).
   • Performance testing: Charge-discharge efficiency, output stability.

5. Factory Audit (if applicable)

   • Required for Type 5 certification or high-risk, high-power battery products.
   • SIRIM may conduct audits to verify production consistency.

Cost Composition & Budget Planning

SIRIM certification costs for Malaysian batteries vary by product complexity and certification type, mainly including:

Basic Cost Components

• Testing fee
• Factory audit fee (initial audit, including travel expenses)
• Certificate application fee
• Annual certificate fee
• Agent service fee

Cost Optimization Suggestions

• Reuse international reports: Holding a CB report can reduce safety testing items (saving approximately 30% of costs).
• Choose an efficient certification path: Select Type 1B for single shipments and Type 5 for long-term sales.
• Pre-testing to avoid risks: Entrust SIRIM-accredited laboratories to pre-test EMC and safety items to avoid re-test losses.

Our Service Advantages

1. Professional Technical Team

Our engineers are well-versed in battery technical characteristics and Malaysian certification requirements, providing accurate technical guidance and problem-solving solutions to ensure a smooth and efficient certification process.

2. Rich Project Experience

We have successfully provided Malaysia SIRIM certification services for numerous battery enterprises. Familiar with key links and common issues in the certification process, we help enterprises effectively avoid certification risks.

3. One-Stop Certification Service

We offer end-to-end services from pre-consultation, test preparation, and sample testing to certificate acquisition. We can also assist enterprises in converting CB certificates into other international certifications.

4. Localized Support

We have established good cooperative relationships with local Malaysian certification bodies and laboratories, enabling us to provide more efficient certification services for customers.

Frequently Asked Questions (FAQs)

Q: How long is SIRIM certification valid?A: Type 5 product certification is valid for 1 year (requires annual renewal); Type 1B batch certification is valid for one-time use only.

Q: What if the certification fails?A: If the test fails, our technical team will provide detailed problem analysis and improvement suggestions, assisting customers in optimizing product design before re-testing.

Q: Do all batteries require SIRIM certification?A: The applicable scope is listed above. For further inquiries, feel free to contact Energy Storage Testing directly.

Malaysia battery certification is a crucial link for products entering the Southeast Asian market. As Malaysia tightens battery safety requirements, obtaining SIRIM certification has become an inevitable choice for battery enterprises. A sound certification strategy not only ensures compliant product launch but also serves as an effective way to enhance competitiveness and gain international market trust.

If you have any questions about Malaysia battery certification or need related services, please feel free to contact Guangdong Energy Storage Testing Technology Co., Ltd.! Our professional team will provide you with detailed technical consulting and personalized certification solutions to safeguard your products’ smooth entry into the Malaysian market.